Shinybow Rackmount 4x4 HDMI Video Matrix Routing Switch, with EDID & RS232 and IR Control, 1080p | SB5645LCM
The new 4 input and 4 output HDMI video matrix switch from Shinybow is the future in high definition audio and video management. This SB-5645LCM unit is built to work with up to four video sources and four HD video displays. The rear operating panel includes four HDMI video inputs that can transmit and route video and audio in any configuration to four connected HDTVs. This video matrix switcher comes with full EDID memory and management, plus a port switching feature aptly named Fast-Speed-Start which allows you to change from one HDMI device to another in as little time as two seconds. No you can enjoy instantaneous switching without any lag or delays. High video bandwidth and data rates for this HDMI matrix switch are 6.75Gbps and 2.5Gbps, respectively. These stats allow you to run this SB5645LCM HD video router at resolutions of up to 1080p and 1920x1200.
The SB-5645LCM has an enhanced front operating panel with major improvements over its predecessor, including a liquid crystal display to show status, connections, modes, etc. of the unit. Standard control of this HDMI matrix is accomplished by simply using the pushbuttons that are located on the front of the 4x4 video switch, although additional control methods can be utilized via Infrared Remote Control (included) or RS232 commands. The RS-232 control option lets you connect this HDMI video matrix router to a control system, such as AMX or Creston or other software and/or hardware devices.
The Shinybow SB-5645LCM allows you to establish a single connection to multiple displays or several connections to several displays in a variety of configurations. Input and transmit your video source device(s) to any of the connected high-definition displays for the ultimate in digital video and sound quality. (This unit supports Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX- PCM, PCM2, LPCM2 sound.)