DVI-D Point-to-Multi-point CAT6 STP Extender up to 220ft | DVX-RX200S
DVS200 Extends Any DVI-D Signal up to 220 Feet to Two Displays and One Local Screen Using CAT6 Cabling While Retaining Perfect Image Quality at Resolutions up to 1920 x 1200 SmartAVI's DVS200 allows you to extend a DVI-D signal to up to four displays via one small unit that also loops a signal back to your computer so local monitoring is possible and simple.
A great example would be a retail shop running its digital signage from a computer in its back office; using the DVS200, a media file or group of files could be broadcast to up to two screens situated around the store while also being viewed locally on that computer's monitor.
Quite simply, the outgoing DVI-D signal from your computer is plugged into the DVS200. This box has one input and two outputs, so that your signal can be sent up to 220 feet over inexpensive CAT6 cables to display screens anywhere in your retail shop, lounge, etc. In addition to the two outgoing signal ports, the unit also has a loop-back port that goes back to your computer, so that you may monitor exactly what is being broadcast to the remote screens. This is all done from a single unit with one power supply.
On power-up, the DVS200 reads and stores the EDID of the DVI monitor connected to the local loop-back port. From that point on, even if the local monitor is not attached to the unit, its DDC is retained in the flash memory of the DVS200 unit and it will operate as if the monitor were connected, offering unhindered use and simple flexibility.
DVI Video Remote Receivers, DVX-RX200S (located toward the bottom of the page under related products), are not included and must be purchased separately along with the 2 Port DVI Splitter/Extender for correct functionality.